The Hobart Handler® 210 Wire Feed MIG Welder handles solid mild steel or stainless, flux cored and aluminum wires, with or without shielding gas. 7 output voltage settings and infinite wire feed control enable fine tuning for the smoothest arc with less spatter.
Item# 1646189
Was $929.99 Sale $899.99
Volts
230
Amps
210
Duty Cycle
30% at 150 Amps, 23 Volts
Mig Ready
Yes
Wire Feed Speed Control
Yes, 40 - 700 IPM
Weldable Metals
Steel, stainless steel, flux corded and aluminum wires
Weld Thickness (in.)
24-gauge up to 3/8in. steel
Clamp Cable Length (ft.)
10
Regulator and Gas Hose Included
Yes
Shielding Gas Required
No
Cart
No
Dimensions L x W x H (in.)
10 5/8 x 19 1/2 x 12 3/8
Amperage output: 25–210
Integrated circuitry for easy connection of spoolgun, Item# 1646190, sold separately
Hobart Handler® 210 Wire Feed MIG Welder — Model#,
November 18, 2008
By JOEBMWfrom NY,NY
"I have only used this welder without the gas and it works great. at the shop i have a miller 210 and coming home to this is a smooth transition. No problems."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
handler 210,
November 18, 2008
By stang971from Farmersville,Tx
Reviewer Images (click to see full-size image)
(Click anywhere inside this popup to close it)
stang971
"Great welder that packs alot of power! sundown said it best that when you add a spool gun for aluminum to this unit, it becomes a world class combo and i have been recommending it to all my friend and every one i come in contact with being that i am in the parts/service business for major ford dealer! I am in no way a professional but with virtually very little welding experience, i have become very secure with my welding technique and appearance and strength of weld in a very short time!"
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Hobart Handler 210,
April 14, 2008
By Michaelm811from Lipan, Tx
"This is my first welder. I did alot of homework before desiding on the Handler 210. It's very easy to set up and the weld quality is excellant. Being an amature, that means alot. I would recomend it to anyone that needs a mig with high amperage rating. Just right for the weekend DIYer."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
A+++,
January 14, 2008
By Mike79from N.C.
"I agree with Sundown on this unit...a great performer in a small package...Hobart hit one out of the park with this one......200 amps in the same case as the HH140 !!....it is easy to adjust and dial in, Hobart's tech. and warranty support are second to none and they do what is right for there customers....I look fwd to seeing what they have in-store for the future....if you are on the fence about this machine if the output is right for your use then grab one while you still can...Hobart can't make them fast enough."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Perfect Wire Feed Welder,
October 29, 2007
By Doityourselferfrom Twin Cities, MN
"Makes quality and strong welds. Easy to set up and use. Ability to weld various materials and thicknesses."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Handler 210,
June 11, 2007
By Sundownfrom Albuquerue, NM
"I have been field testing this new Hobart offering for the past 4 or 5 months, during that time it has performed flawlessly. And when you add the dedicated spoolgun for aluminum it becomes even a better bargin. Lots of performance here for the money for sure, and when you add that to Hobarts customer sevice its a hard combo to beat in my opinion."
What is your level of technical expertise?:
Home Handyman
