 |
FEATURED REVIEW
|
|
| Overall Rating: |
|
5
/ 5
|
miracle clamp,
March 7, 2007
By alfie1
from West Springfield, Massachusetts
|
"This is a tool I have been looking for, for a long time. I have used visegrips, c-clamps, a combination of both, but still did not come close to achieving my goal of joining two pieces at a 90 deg angle. With the Northern Industrial Angle clamp with V-jaws I can clamp two pieces together and know that I will have a perfect fit every time. There are times when we all need a third hand, but with this clamp you don't. I would recommend this tool to my friends."
|
|
What is your level of technical expertise?:
Home Handyman
|
1 of 1 people found this review helpful.
|
| Overall Rating: |
|
2
/ 5
|
Clamp Needs Work,
March 19, 2008
By nelsonic
from Pacific Northwest
|
"I will be able to use this clamp on angle iron when I have a machinist modify it because the inserts are not flush with the base of the clamp. I have the insert slots lowered a bit so that the inserts are flush. Also, there are no instructions on how to use it regarding the inserts, but I figured it out. When it is being machined, I will have it squared true as well (I assume it is out of square). The cheapy thin sheet metal screw ends could use a little beefing up as well, possibly with a sliding block - again for use on angle iron. BUT, I guess for the price, who can complain?"
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Hefty Clamp,
January 14, 2008
By MarineEagleOne
from Brooklyn, NY
|
"This clamp is heavy duty. You will not go wrong welding anything at precise 90 degree angle. The price is great compared to comprable tools."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
3
/ 5
|
Welding Angle Clamp with V-Jaws,
September 22, 2007
By Toolmaker
from El Segundo, Calif.
|
"The surfaces on my clamp are not parallel and require macining. Having a clamp of this nature would be better suited if the profile were much lower. Not able to use the clamp for a specific job it was purchased for. The quality is fairly excellent of material and ease of operation. There is always room for improvement. Reducing the height by 2 or so inches would make an incredible product. One must first identify a problem before a solution can be offered.
Reducing the height and creating a flat parallel surface would allow the clamp to be used on a welding table, the specific job it was purchased for."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
angle clamp,
July 9, 2007
By JeepFab
from Pete northern california
|
"WOW Ok all you fab junkies out there you know we have every clamp jig ect we can find. these welding clamp are a great addition to my collection of clamps and you can't beat the price very heavy duty and a lot of room for welding you can get your tig torch all around with no problems A+++ I checked for how square they were they were a true 90 degrees right out of the box.
I would recomend these to any one out there ."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
square corner weld bracket,
March 9, 2007
By Anonymous Reviewer
from Duluth, Mn.
|
"Works fine for 90 degree corners!"
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
clamps,
March 7, 2007
By shess
from Pennsylvania
|
"Heavy weight, good product for the price. Could work a little smoother out of the box, but with some use they will be fine."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Northern Industrial Welding Angle Clamp/V-Jaws,
March 6, 2007
By JLKSS
from Davenport, Iowa
|
"Although this clamp is advertised as a welding clamp, I have found it very adaptable to my wood working when I am glueing 45 degree wood joints which are unequal in thickness. I also gave a set to my friend who does a lot of metal fabrication on race cars and custom exhaust work. They are very sturdy in comparison to some of the picture frame clamps I had previously used. They have a quality finish which seems to be preventing rust from accumulating. The price of this item is unusually low considering the long-lasting quality you are receiving. A set of these clamps is a reasonable addition to any do-it-yourselfer or professional craftsman. You won't be disappointed in your purchase."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
very good,
January 13, 2007
By fordman
from Bluegrass State
|
"easy to use wellbuilt"
|
|
What is your level of technical expertise?:
Professional
|
|
|
