| Overall Rating: |
|
5
/ 5
|
Great Buy,
November 18, 2008
By Hellraiser
from Independence, KS
|
"I work in a fab shop and always wanted a plasma cutter for home but couldn't see spending $1300 or more on one. I figured I would try the 375 for less than half the price of the others. I'm very pleased with the performance and will recommend it to everyone."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
N.I.375plasma,
November 18, 2008
By fleabag
from Witchita,Kansas
|
"The Northern Industrial 375 Plasma Cutter was capable of everything I asked of it .I am a Master Welder by trade and was suprised at its ease of operation.It's simplicity would make it ideal for a novice,and for home use"
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
A must have,
August 21, 2008
By HandyHawaiian001
from Honolulu Hawaii
|
"I can't say enough about Northern's customer support, I purchased this unit for some light repair work on a church vehicle. The first one we received malfunctioned, I called the help line and they instructed me on how to return the unit and that a replacement would be sent, well we did and a week later we were cutting out the bad spots on our vehicle and welding it back up. This unit has now completed 16 projects and it's still going."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Great little machine,
August 18, 2008
By LT1906
from Monroe, NC
|
"Thought about buying a higher priced machine, glad I saved my money cause this one does everything I need for less. First time I tried it was on some 5/16 stainless just to see if it would do it, took some time but it cut right through it. Would highly recommend it to the home mechanic or hobbyist."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
Good Deal for the money,
August 14, 2008
By HobbyWelderWV
from Ripley,WV
|
"My first plasma cutter arrived with some minor damage. It still worked, but Northern exchanged it with no problems.
Cutter works great and will cut through steel like a knife thru hot butter. Consumables are reasonably priced and seem to last a long time."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
works for me,
August 13, 2008
By Hutman
from TEXAS
|
"There is a small learning curve starting out, but about 30 minutes into playing with the cutter it worked very well. You have to have a good ground or it will sputter (duh). Used it to cut body mount bolts, 1/2 inch aluminum, various sheet metals. Cuts quick and clean."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
good bu be carefull,
August 12, 2008
By Kenzz
from Arkansas
|
"I've used this plasma cutter for about a year now it cuts GREAT but don't let
the replacable electrode burn up so far you can't get it out,,also might be hard to get little parts like the brass deal that the electrode screws into....."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Plasma cutter,
August 11, 2008
By 56gasser
from Bradshaw Nebraska
|
"The first one I ordered was broke and didn't work. Called and they sent me a new one- great place to do bussiness with. New one works great easy to use takes a little to determine where to adjust the settings to depending on the material your cutting. This little unit works great."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
1
/ 5
|
375 plasma cutter,
August 11, 2008
By pwyant01
from North Liberty, In
|
"when the plasma cutter is working it does a great job. we are now on our third plasma cutter. But I must say "that you have been great and very prompt in replacing the defective cutters. Your treatment of your customers is outstanding and greatly appreciately."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Great Product,
May 28, 2008
By TowerRigger
from Wichita, Ks.
|
"Cuts very well. I'm using it for my project Toyota Truggy to make brakets and other miscillanious projects. The only thing I didn't care for much is that the manual doesn't have a chart for the settings. I figured it out easily though."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
