Choose between AC or DC output to expand your welding options. The LX 235 AC/160 DC has a maximum of 235 AC and 160 DC weld output. Smooth DC weld performance with easy arc starts is easily adjusted with the Accu-Set infinite amperage control. Weld time also increases up to 100% with decreased output, with the Accu-Set infinite amperage control. Less spatter and greater control on thin materials plus easier out-of-position welding. U.S.A.
Item# 164679
Was $459.99 Sale $439.99
Volts
230
Amps
30 - 235 AC/30 - 160 DC
Duty Cycle
20% at 225 Amps AC, 100% at 100 Amps AC, 20% at 150 Amps DC, 100% at 60 Amps DC
Amperage Adjustments
Accu-Set infinite current control, 1 amp increments
Range Selection
High/Low AC DCEN/DCEP
Weldable Metals
Steel, stainless steel, and cast iron
Weld Thickness (in.)
1/2in. AC, 1/4in. DC
Electrode Size (in.)
1/16 - 5/32
Electrode Cable Length (ft.)
15
Clamp Cable Length (ft.)
10
Power Cord (ft.)
5
Dimensions L x W x H (in.)
12 3/4in. x 17 1/2 x 18 3/4
Single phase output
235 Amp max. output; rated for 20% higher output than competitive welders
Accu-Set amperage indicator for accurately controlling amperage or heat output
Infinite current control allows the operator to adjust output by as little as 1 Amp increments
Output selector switch to quickly select low or high range without adjusting the output leads
Fully varnished magnetic coils for enhanced coil reliability and life
Forced-draft cooling fan runs continuously and helps to extend the life of the power source
5/3/1 Industrial Warranty 5-year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes
3-year warranty on drive systems, PC boards, solenoid valves, switches and controls
1-year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days
Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty
Engine warranty is provided by the engine manufacturer
21 of 21 would recommend this product to a friend.
Product Reviews
FEATURED REVIEW
Overall Rating:
5
/ 5
Real do-it-yourselfers WELD!,
April 14, 2008
By BAM1from Atlanta, Ga
"This is a super welder. We wanted something portable but not limited to 230 volts in case that was not available. The AC/DC option also lets you weld with extreme accuracy. According to the instructions there is also a wire welding uplift option. This covers ALL the bases. I strongly recommend getting the wheel package for added mobility."
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
Overall Rating:
5
/ 5
elect89,
November 23, 2008
By elect89from Newport News, Va
"The Hobart Stickmate, has been a real plus for this person with limited welding experience. I am able to move it around by myself, and It has a very finite heat adjustment, which makes setting up and welding with this product a breeze."
What is your level of technical expertise?:
Beginner
Overall Rating:
5
/ 5
Hobart Stickmate,
November 20, 2008
By XJETMECHfrom Hampton, VA
"This is a great shop welder. It does all the heavy welding in my shop. I would recommend it to anyone."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
good little welder,
November 20, 2008
By shane666from Reno, NV
"Its a powerful little machine and compares with bigger and more expensive welders. it has already paid for itself in all the jobs i have used it for. i am very pleased with this welder. The only problem i had with it was the shipping, it took northern tool a couple of months to get me one that wasn't damaged."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
welder,
November 19, 2008
By coryxracerfrom eastern ohio
"The hobart stick welder does a very good job and is easy to use and set up."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Wonderful Welder,
November 19, 2008
By FastDavefrom Jonesboro, AR
"I have owned my Stickmate for almost 10 years. I've been able to do so much more than I had ever imagined. I do ALL my own repairs now! Things I once had to take to a repair shop or even buy replacement parts for are now easily repaired in the convenience of my own shop! I recently had a ball joint bust out on my riding mower and instead of stopping the job immediately I was able to weld it back together and it lasted the rest of the Summer. I ordered a new ball joint and had it waiting but the weld continued to last and last. I believe it's because of the penetration my Stickmate achieved during the welding process! I couldn't have asked for anything better. I'm also able to do any of the fabrication jobs I once only wished for. Things I once bolted together, like metal shelving, are now welded together. We all know welding rods are less expensive than nuts, bolts & washers PLUS the weld holds better! I don't know how I ever made it without my Hobart Stickmate Welder!!! Well, actually I didn't "make it"... someone else did it for me!"
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Excellent machine,
November 19, 2008
By BobGman
"You could find a better welder but not at this price. I've used it for everything building a thin tube frame to welding a cracked truck frame back together. Had it for about 3 years now. Not a lick of trouble. The only thing I changed was putting longer leads on to make it easier to work in the garage. PIcture shows shows it with short leads."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Hobart,
November 18, 2008
By seanconnfrom Houston, TX
"I have been using for about a year now. I'm quite pleased with the performance."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Full service welder,
November 18, 2008
By LarryNEKfrom Northern , Vermont
"We have a shop at our Waste Water Plant that maintains all sorts of equipment from pumps to line trucks. We need a fullservice welder and the Stickmate LX235 fulfills all our needs. The DC option gives us more flexibility for vertical and over head welding. It has been a real asset to our shop."
What is your level of technical expertise?:
Professional
Overall Rating:
4
/ 5
Nice Machine,
November 18, 2008
By SparkTXfrom Texas
"I am a home hobby welder and would definitely recommend this unit to anyone. It is very versatile and reliable. The only thing I would recommend is that considering the DC option adds quite a bit of expense to the unit over the AC only LX235, that Hobart could upgrade the relatively light duty ground cable and lengthen both welding cables. Otherwise a wonderful machine."
What is your level of technical expertise?:
Home Handyman
