| Overall Rating: |
|
3
/ 5
|
Works but delicate,
June 22, 2008
By MattW
from S. Florida
|
"It works well, but is delicate. Mine worked great until I dropped it on the concrete. Nothing appeared physically broken, but the needle no longer points at zero when it's not in use, and the readings seem to be consistently off by about 1000psi post-drop. It's my fault for dropping it, obviously I broke something inside, but it would be nice if it were more heavy duty. Before the drop it worked well, gave consistent readings that seemed to be accurate judging by the ratings for my pressure washer. So it works great, just don't drop it."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Northstar pressure washer gauge-5000 PSI,
April 16, 2008
By petro47th
from Luling La.
|
"Used pressure gauge today for 1st time and was satisfied with its performance , quality and price. Thanks"
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
Pressure washer guage,
March 30, 2008
By danaurora
from Katy, Texas
|
"Product is easy to install and use. It gives me assurance of what the pressure is when cranking up or down on the unloader. Guage is not accurate on the low end. It reads 400-500 psi with just hose line pressure and the unloader backed out all the way. It does read within 100 psi of the rating of my pressure washer when the unloader turned up to max. I disconnect it when I store my washer to eliminate potential for corrosion. Good accessory for the money."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
It Can Take The Pressure,
January 14, 2008
By SrMechEngr
from Gulf Coast
|
"You don't need to make any adjustments to your pump to appreciate the usefulness of this little device. The simplicity of installation and ability to protect the gauge has made this a must have product. I needed a gauge to help set the unloader pressure, but did not want to hard mount a gauge, since the vibration will eat it alive. The parts are of good construction and the gauge is easy to read, especially while the pump is operating and can be installed in the discharge line at a point of your selection. Virtually no maintenance other than occasional lubrication to prevent corrosion. I highly recommend this product."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
pressure guage,
October 21, 2007
By topcat777
from South Carolina
|
"A very good pressure gauge.It lets you know the true pressure that is being presented from the pump."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
NorthStar Pressure Washer Pressure Gauge — 5000 PS,
October 9, 2007
By SCH5711
from Tacoma, Washinton
|
"Worked perfectly. Just plugged in with the quick connect fittings between the pump and the hose. My pressure washer has adjustable pressure to 3000 psi. Got instant and accurate pressure readings from 0 to 3000 psi. And with the dail being liquid filled made it easy to read (steady needle) Just what I was looking for."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
Quick disconnect pressure gauge,
August 23, 2007
By fixithandyman
from New Mexico
|
"The pressure gauge itself is not the one shown in the on-line catalog. However it has functioned correctly for about 2 weeks. To date I rate it a good value."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Well made,
July 14, 2007
By Alfunso
from Brick, NJ
|
"Does what is expected!"
|
|
What is your level of technical expertise?:
Professional
|
|
|