| Overall Rating: |
|
4
/ 5
|
mouting bracket,
November 17, 2008
By bikeral
from Alabama
|
"This mount fit good and bolted right up. It is very lightweight but still stiff."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Makes assembly far easier,
November 17, 2008
By mc9864
from Durango, CO
|
"When I purchased this bracket to mount a 5 hp Honda engine to a Halex 11 GPM
pump I was somewhat concerned that things might not work as advertised. My
concerns were nullified when I talked with a very nice and very knowledge lady
on Northern's order line; she knew the product and all the parameters. You
normally don't find that level of service and expertise. I bought the bracket, a
perfect fit, couldn't be more pleased."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Hydraulic Pump Mounting Bracket,
April 15, 2008
By woodpigs
from Reno, NV.
|
"This item made the job fast & easy. Just bolt the pump on, slide the coupling on the pump shaft & tighten, then bolt to motor. Works great."
|
|
What is your level of technical expertise?:
Professional
|
|
 |
Top 100 Contributor
|
|
| Overall Rating: |
|
5
/ 5
|
Mounting Bracket,
January 14, 2008
By RudyZ
from Eagle Pass, Texas
|
"This mounting bracket comes in handy when used with northertool hydraulic pumps. Very easy to install in small engines."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Hydraulic Pump Mounting Bracket,
October 15, 2007
By Larri
from Northern Maryland
|
"The Hydraulic Pump Mounting Bracket was delivered standard in a couple of days. I have installed the bracket and it was a good fit."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
Worth the money,
October 8, 2007
By dunni99
from Holden, Massachusetts
|
"I purchased this to mate a hydrulic pump to an engine for a log splitter. Worked great, the only problem was i didnt purchase the pump and engine from northern, and was guessing on sizes. I got the right size. Just be careful when tightening the mounting bolts, If you go too tight you can tweak the shaft of the motor and the engine will not turn over,"
|
|
What is your level of technical expertise?:
Home Handyman
|
1 of 1 people found this review helpful.
|
| Overall Rating: |
|
5
/ 5
|
Just right,
July 9, 2007
By reetoheor
from OrangeVale,Calif
|
"I had purchased a log splitter that had a pump but not an engine,
and I had know Idea how to marry these together.
after checking the Northern Tool web site I found this Mounting Bracket.
I ordered it and every thing went together like it was ment to.
Great product."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
hydraulic pump mounts,
December 1, 2006
By tmac
from Mobile AL
|
"I recently acquired a log splitter that my brother built in the late 70's as a project in welding class. I went about cleaning, putting new hoses on and also a "new"
engine which came off of generator I purchased in 1979 after Frederick hit mobile. The problem came with trying to mount the engine to align with the two stage pump I had purchased off of E-bay. I was browsing thru the northern tool catalog in the hydraulic pump section and spotted the hydraulic pump mounts and purchased one. This made the job simpler by being able to install the engine without worrying about alignment. I recommend this to anyone repowering a hydraulic device.
ps
buy the optional bolt kit for this mount. saves time trying to find the proper bolts and thread sizes."
|
|
|
|
|
