Advantek Titanium Drill Bits — 327-Pc. Set, Model# 19248 | Titanium Drill Bits

Includes (qty.)	327
Material	High speed steel
Diameter (in.)	1/16 - 1/2, A-Z
Case Included	Yes

29 fractional bits, 1/16in. through 1/2in.
Number bits, #1 through #60
Letter bits, A through Z

Manufacturer Warranty: Lifetime Warranty

(1) Drill bit box
(1) Removable insert

	Calculate Shipping
	Ask a Product Expert
	Printer-Friendly Product Page

	Send to a Friend

	Shop for more Advantek Workshop
	Shop for more Power Tools
	Shop for more Drill Bits
	Shop for more Titanium Drill Bits
	View Shopping Cart

	NorthernTool.com is Hacker Safe™
	Low Price Guarantee
	26 Years in Business
	Free Catalog
	Privacy Policy

Overall Rating

3.3 / 5

3 of 4 would recommend this product to a friend.

Product Reviews

Overall Rating:

5 / 5

Advantek 327 piece drill bit set, April 14, 2008
By mgcardoc from Scottsdale, Arizona

"I ordered several sets of these dril bits for my shop. We have used them extensively. They are a great value for the money and seemed to have held up well so far. It sure is nice to have the replacement bits right there for when you break a small drill bit. You won't find a better deal on a 327 piece drill titanium drill bit set (I looked!)"

What is your level of technical expertise?: Professional

Overall Rating:

2 / 5

Advantek bits not up to par, April 7, 2008
By Illinoistoolbuyer from Illinois

"The bits contained in this set are not acceptable for the use in which one would assume lettered and numbered drills would be used. These bits appear to be hand sharpened and exihibit several types of defects that are the result of that sharpening process. For instance, the the heels or trailing edges of some of the bits are equal to or higher than the cone surface that forms the cutting edge or lip. Without the proper clearance between the lip and heel the bits wIll not cut. This problem can be present on one flute of a single bit but not the other flute - one side/lip is cutting the other is not. Some of the bits are sharpened so that lip/cutting edge on one flute is of greater length than the other. This causes the point of the bit to be off center.
In my opinion these bits will "work " for drilling pilot holes in 2x4s if one is building a deck, etc., however, if one plans to use them to drill a precise hole in a piece of stock be prepared to resharpen the bit."

What is your level of technical expertise?: Professional

Overall Rating:

2 / 5

January 14, 2008
By JeepM715 from Troy, MI

"Lots of drill bits for the money, but it's a good thing there is a lot of them, you'll need them. They are OK for someone who only expects to drill a few holes here and there, but don't expect exceptional life out of them."

What is your level of technical expertise?: Professional

Overall Rating:

4 / 5

Drill Set, October 9, 2007
By borderdog from buffalo,ny

"This a nice complete set of bits. The case is the only disappointing issue with the set. The case is not near the quality of the bits."

What is your level of technical expertise?: Home Handyman

2 of 2 people found this review helpful.