If you have zerk fittings you need this tool!,
August 18, 2008
By Showmo66from Atlanta
"Anyone who has spent time underneath any machinery with a manual grease gun is going to love this thing! It makes a quick and painless job of something that has been drudgery. I have a vintage 4x4 pickup with manual transmission, transfer case, and a front drive axle. There are 2 U-joints on the driveshaft between the transmission and transfer case, 2 on the shaft between the transfer case and rear differential, 2 on the shaft between the transfer case and front differential and two on the front drive axle, in addition to grease fittings on the ball joints and clutch linkage. This beast eats grease cartridges almost as fast as you can load them in the gun. Thank you Northern Tool. I've started giving these things to friends as Christmas Gifts."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
grease gun,
January 14, 2008
By brad4570from buckeye arizona
"if you have a compressor , this is the only way to grease something. just be careful not to pop the grease seals on things."
What is your level of technical expertise?:
Professional
Number One Contributor
Overall Rating:
5
/ 5
Frees up a hand to hold the nozzle,
August 31, 2007
By farmerwannabeefrom Rural Pennsylvania
"This is an extremely handy tool. It uses standard greese cartridges, gives full pressure lube with a simple trigger squeeze, and best of all, it allows me to hold the nozzle with one hand and the greese gun in the other. If you've been holding the greese gun against the ground or your leg in order to pump it to keep the nozzle from slipping off of an inaccessible fitting, you're going to love this tool. It costs no more than a good quality manual gun, yet it is so much friendlier to use. I typically finish a lube job with none of the grease on my clothes or my hands. This gun stays clean because it is always held in one hand. The "rag hand" that cleans the fittings never touches the gun. I no longer dread lubricating equipment now that I have this handy tool."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Well worth the price!,
June 24, 2007
By grandpafixitfrom South Carolina
"I have been looking at air grease guns for a while but was turned off by the price. I liked the looks of this one and the price was right so I gave it a try. I have not been disappointed. It makes all my grease jobs go faster and I don't end up with sore hand muscles from pumping the old model. It uses the same cartridges as the hand gun and snaps to the quick connect air line in seconds. I bought the flex hose and I recommend that for the hard to reach fittings. Great deal!"
What is your level of technical expertise?:
Home Handyman
