NorthStar PTO Generator — 13,000 Watt, 24 HP Required
Order Today and Save $150
Single-phase generator cranks out 100 Amps @ 120V, 50 Amps @ 240V. Requires 24 PTO HP or more for rated output: 13,000 surge Watts and 12,000 continuous Watts. Industry standard 1 3/8in., 6-spline input shaft is geared for 540 RPM. 100in. copper windings, metal construction, 100 Amp thermal magnetic breaker and plastic shield provide high performance, durability, long life and safe operation. Outlets include welding receptacle and four 120V 20 Amp receptacles and voltmeter. Pushbutton reset circuit breakers.
Greater Generator,
July 11, 2008
By Network50from Galliano Louisiana
"I bought this generator after Hurricane Katrina and have used it several times for power outages. In fact I'm using in right now to power everything including my computer as I type this. The Generator runs fine with my 30hp tractor is powerful enough to run my 4 ton ac and most everything in the house. I do have to be careful not to run the A/C and the stove at the same time but its a minor inconvenience. I highly recommend this product."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
3
/ 5
A few problems but it works,
April 24, 2008
By Workshardfrom North Carolina
"I bought this generator to run a home arc welder (Lincoln AC/DC 225/125) for doing welding on a bridge. I used a JD2240 (50hp farm tractor) and mounted the generator on a carry all. According to the web site, the generator has a welding outlet. However, this is not the case. The generator has a range/oven outlet which is slightly different. So I got a range plug and a welding receptacle and wired it for the welder. (minus 1 star)
Performance for running the welder was marginal at best. It did not run AC well at all. DC was acceptable and it did get the job done using 7014 rods at DC+125. I did not try setting the welder at a high AC setting to test cutting. I don't think it would have done the job. (minus 1 star)
I did contact tech support several times who seemed knowledgable and were helpful. According to the first person I talked to, the generator should have been able to handle the specs for the welder. The second person indicated there might be a problem at higher settings during start-up.
There is a problem with the meter guage on the generator that measures the generator output. At first it seemed to work OK. But after several hours, the needle started fluctuating all over the place. After more continued use, the needed somewhat stabalized, but kept showing lower and lower output with more use. However, this appeared to be a problem with the meter guage as the performance of the generator did not seem to be affected. (minus 1/2 star)
The bottom line is that the generator did do the job for which I bought it for, though I don't think it was really designed to be used with a welder of the size I was using. I've used it for about 80 hours. I think it would work fine for lighter loads. I would have given 2 1/2 stars if half stars were available. I gave the benefit of the doubt and rounded up. I'm also torn between recommending this generator or not."
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
Top 100 Contributor
Overall Rating:
5
/ 5
PTO Generator,
April 14, 2008
By Highflier450from Sylvia, KS
"Our power goes out from time to time in relation to storms and the fact we're at "the end of the line" of our rural electric coop. In the past we've had to run two generators and split the serivce to cover all our needs...wells, heaters etc for our alpaca ranch; in addition to the house and its needs. We now can quickly hook up the 3-point platform we mounted the PTO generator on, plug it in and we have all the power we need. AND, the 27 hp diesel runs much cheaper than the two gas generators we were using. I'd priced similar generators at the state fair and other places, this was by far the best deal we found...thanks, Northern!"
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Star PTO Generator — 13,000 Watt,
January 21, 2008
By Wattfrom North Carolina
"Great unit for power outages. Works very well with my 30 HP tractor and will keep all needed household items going while in use."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
PTO Generator,
March 7, 2007
By cuttingedgefrom southern maryland
"I would definitely recommend this unit. It works really well. I mounted it to a 3pt hitch carry all, so it has adjustable ground clearance, and I can attach and carry my welder and hang all needed power cords and drop cords. Having my compact 3 cylinder diesel makes this a very portable, and very efficient generator."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Best Peace of Mind & Money,
March 7, 2007
By Clarencefrom Rural Illinois
"Bought this generator after the big ice storm, it replaced an 8.5kw Honda. We had two more power outages after that and my wife of 35 years was pleasantly surprise to be able to continue ALL of her normal routines while the little John Deere set out supplying the entire house with electricity. The power was right on que with the 60 hertz and 120 volts at the exact point that the needle on the gauge indicated. I ran a plasma tv and computer on the generator and everything was great. The neighbors were envious of my house in the light. An investment that will serve for years to come."
What is your level of technical expertise?:
Professional
1 of 1 people found this review helpful.
Overall Rating:
5
/ 5
Good Design, works great,
November 23, 2006
By MarkLfrom Chicago
"Works great, I like the large safety shield, makes it easy to reach in and hook up PTO shaft but still provides good protection. A small problem bolting it down because the plates on each side that provide ventilation stick down slightly lower than the base of the unit, so they get caught when you try to slide it around. I took them off until I was done mounting it, then put them back on, no big deal. I think it would be better to mount the unit on small spacers to let it dry out underneath after using it in bad weather. Unit runs smooth at full speed, can mount it on any small trailer without a problem."
What is your level of technical expertise?:
Professional
1 of 1 people found this review helpful.
Overall Rating:
5
/ 5
Great Generator,
November 21, 2006
By MW54from Indian Head, MD
"This PTO generator is easy to use and very durable. We use the generator on our tractor at home to give us power around the house during power outages and in the woods working on projects. I highly reccommend this product."
What is your level of technical expertise?:
Home Handyman
To see more images and rich media content please install the current version of Flash player.
