The new AirForce™ 250CI plasma cutter with built-in air compressor features a new lightweight design that is both lightweight and powerful. Built-in compressor for total portability and low system cost. Cuts mild steel up to 1/4in. thick using standard household current. New HP-25 torch is more comfortable, efficient and economical. U.S.A.
Item# 164791
Only $799.99
Cutting Thickness (in.)
Up to 1/4, depending on material
Volts
115
Amps
20
Duty Cycle
35% at 12 Amps, 110 Volts DC
Pilot Arc
Yes
Plasma Gas Flow/Pressure
Preset with built-in compressor
Clamp Cable Length (ft.)
16
Power Cord (ft.)
7
Cart
No
Dimensions L x W x H (in.)
7 1/2 x 13 x 10
New lightweight, powerful inverter design
New HP-25 torch is more efficient and comfortable
Built-in piston-driven air compressor
Cuts mild steel up to 1/8in. @ 10in. per minute; 1/4in. mild steel @ 3in. per minute
Also cuts stainless steel, aluminum, brass and copper 5/3/1 Industrial Warranty
5 year warranty on transformers, stabilizers, reactors, rectifiers, rotors, stators and brushes
3 year warranty on drive systems, PC boards, solenoid valves, switches and controls
1 year warranty on MIG guns, plasma torches, relays, contactor, triggers, regulator, accessories, spool guns, battery, field options and running gear. (90 days for industrial use.)
Normal wear items such as drive rolls, contact tips, nozzle, gas diffuser, plasma torch tips and electrodes and weld cables are not covered under warranty.
Engine warranty is provided by the engine manufacturer.
Must have tool!,
April 21, 2008
By Rons1stRodfrom Spokane, WA
"As a first time hotrod builder, there are many tools that I reach for, but none more than my plasma cutter. This cutter is absolutely fantastic and is a huge time saver! I have air saws and cutters of various types but I always reach for my Hobart AirForce 250 if I want to cut metal or aluminum fast, clean and easily! I would recommend this product to anybody even remotely thinking about purchasing one. I only regret one thing and that is buying all the other cutting tools!
You won't go wrong with this and will enjoy the easy to read instructions and reliability of a HOBART machine."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Hobart Plasma Cutter is a great tool,
April 21, 2008
By Shorty954from Roseburg, Oregon
"I loved this unit from the first day we got it at the shop. Easy to setup and use. Electricity bill has not changed sense we got it either. Our old 110v plasma used the same amount of power as the 220v does. We here at Gopher Mining Products all love this machine very much."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Plasma cutter,
April 14, 2008
By deacofrom Escanaba, MI
"Right out of the box this Hobart saved me time and money. I cut off exhaust flange bolts at the manifold on a Dodge truck where it was not possible to use a torch. They were larger than 1/4" and it was no problem. This is an excellent tool. From Northern I purchased it at a substantial savings and got a gift card in the deal. I only wish I would have bought it sooner."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
plasma cutter,
January 14, 2008
By novamanfrom wetumpka, Al
"It was very easy to use right out of the box. Most of my work is around the house on hobbie cars. It cut the hole in the bed of my truck for a fuel cell without burning the paint. Every hobbiest needs one."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
kld,
January 14, 2008
By kenskldfrom seattle wa
"This plasma cutter is one of the best tools I have ever purchased especially for cutting stainless steel , It is portable and does an excellent job."
What is your level of technical expertise?:
Professional
Overall Rating:
3
/ 5
light duty, sheet metal only,
December 1, 2007
By ironwoodworkerfrom chicago
"I just bought the unit and tried it for the first time. I loved the fact that you don't need a compressor and it's so easy to set up and use. It worked really well with clean cuts on .125 and below but I use 3/16" frequently and found that you have to have a very steady hand to get a good cut and it'sslow but still faster that a bandsaw, if you try to go back and re-cut the results are disappointing, if you plan on using 3/16" (.188) I would recommend sizing up as I am going to return the 250 and buy the Hobart Airforce 400, I already have a compressor. Ron"
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Excellent Unit,
October 30, 2007
By deanjfrom Wyoming
"I have this plasma cutter and it wil do what it says. 1/4" is its limit and it is slower here than anywhere but for anythiing thinner it is the real deal. I have had no isses with its quality. This is a great unit."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
4
/ 5
Plasma Cutter,
October 29, 2007
By Fenwickfrom Dresden, OH
"Overall, this is a great unit. It works perfectly for cutting sheet metal - I use it a lot for making metal art and signs. The only problem I found with it is that if it is a particularly humid day (i.e. raining) the unit gets moisture inside of it and won't arc up. This has happened a couple of times, one of which was very annoying because it took a few hours of messing with the unit to get the moisture out (I really needed it that day or I would have gone back on a dry day...) However - I understand that this is a problem with most plasma cutters. Other than that - works great!"
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
Plasma Cutter,
October 8, 2007
By pepe1from Grove, OK
"Unit is compact in size and works very well. It meets my home workshop needs very well."
What is your level of technical expertise?:
Home Handyman
1 of 1 people found this review helpful.
To see more images and rich media content please install the current version of Flash player.
