Cuts with razor-sharp precision without sparks, smoke or slag. No deburring or milling needed. Requires no coolant; material stays cool to the touch. Metal chip collector keeps work area clean. On-board wrench storage for quick blade changes.
"This metal cutting saw works very well, and unlike abrasive metal cutting varities, it throws off no sparks. It is the next best thing to a cold saw, at a much lower price."
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
excelelnt prodct,
April 14, 2008
By wayne2from floral city' florida
"i use this saw all the time to do fabrication of all types and it works much faster than a chop saw and leaves a cleaner finished product and i have recommended it to others"
What is your level of technical expertise?:
Professional
Overall Rating:
4
/ 5
DRY CUT SAW,
October 8, 2007
By dabossfrom Security, CO.
"THE CUTS THE SAW MAKES ARE PRECISE WITH NO DISTORTION. JUST TAKE EACH CUT SLOW OR THE BLADE WILL GRAB THE MATERIAL YOU ARE CUTTING IF NOT SECURED PROPERLY. DEFINATELY A PLUS FOR MY SHOP!!!"
What is your level of technical expertise?:
Professional
Overall Rating:
4
/ 5
July 24, 2007
By flat6from Los Angeles, CA
"I've used the saw to cut 4130 and DOM tubing with excellent results. I found it cuts cleaner and far faster than my Dewalt abrasive saw for these types of materials. I haven't had any blade problems to date. It's not a high quality tool, but for the money, it gets the job done."
What is your level of technical expertise?:
Professional
Overall Rating:
4
/ 5
March 7, 2007
By jimsfrom Arizona
"We use this saw in a fabrication shop and are very happy with it. The vise handle is made of plastic and has failed(broken) so we removed the metal insert from the handle and install a bolt, no more problems with that. The saw works great and we have shown it to several other shop owners with a positive recommendation."
What is your level of technical expertise?:
Professional
Overall Rating:
1
/ 5
Not worth it!,
November 17, 2006
By MarkCfrom Colorado
"I used the saw to cut 4 pieces of metal when the vise stripped out, binding the blade and taking out some teeth on the $100.00 blade. The saw is made cheaply I would recommend spending the extra money on the Milwaukee. Save yourself a headache."
What is your level of technical expertise?:
Professional
