Northern Industrial Chain Saw Case
Store your chain saw while traveling from job to job or between seasons and keep everything together in one safe place. Holds most brands of chain saws with bars up to 24n., along with necessary accessories: filing items, tools, bar and chain oil, manuals and more. U.S.A.
Product Specs
Additional Specs
- Inside dimensions:
- 18.5in. side to side
- 9.5in. front to back
- 11.08in. top to bottom
- 24in. scabbard
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
4.2
/
5
15 of 16(94%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
4
/
5
plenty of room,
November 2, 2009
By jdun
from Northern California
"Well made case with plenty of room to store a chainsaw plus oils and ear protection and tools and rags. Plus it's flat-topped so I can store other things on top of it and pack around it much more easily than a standard chainsaw case."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Sturdy Case Husqvarna 455 24" Bar,
June 18, 2009
By Logsplitterman
from South Jersey
"This is a great value for the case you get!! Sturdy handle and hinges! Fits my Husqvarna 455 Rancher with a 24" Bar like it was made for it! Plenty of extra room for a quart of bar oil and some 2 cycle oil for tha gas, I also put 4 spare chains in my case and some tools(bar wrench, Screwdriver, channel locks, chain files). If I needed another I would buy one right now!"
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Good Value, Good Product,
April 16, 2009
By JoshO
from Tyngsboro, MA
"I have an 18" Echo CS-400 chainsaw, and bought this case for that. The case is made of heavy-duty plastic, even the clips & hinges (which worries me a bit since I could easily see these breaking). The entire case flips open for easy access to everything and there is plenty of room for chain oil, tools, instruction manual, etc. The guide bar cover slides in and out of the case pretty easily and is more than long enough for an 18" saw.
I only have two pieces of criticism:
1. The guide bar cover was extremely difficult to fit over the guide bar at first. I actually had to let it sit out in the sun for a while to soften up the plastic, then I was able to force it in. Now that the saw has been in and out a few times, it's not as hard but still a bit of a struggle.
1. The guide bar cover was extremely difficult to fit over the guide bar at first. I actually had to let it sit out in the sun for a while to soften up the plastic, then I was able to force it in. Now that the saw has been in and out a few times, it's not as hard but still a bit of a struggle.
2. The velcro strap that holds the handle of the chainsaw in place while in the case is bolted into the plastic case and the bolt popped out immediately when I tried to pull the velcro apart to get my saw in there on the first use. I pushed it back in and now I'm just careful not to pull too hard. But that being the case, I don't believe the saw would stay in place if the case is being jarred.
Other than those two minor problems, the case is roomy and convenient and the price is right. The case doubles as a good work area to tune up the saw while on the job site too."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
chain saw case,
March 16, 2009
By hedgehog
from dallas,ga.
"heavy duty consruction,front of case folds down for easy loading/removal,sturdy latches,robust handle,plenty of room for tools,bar oil,etc."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Chain saw case,
March 16, 2009
By Stubby
from VA
"Good case for the price. Enough room for extras. Only complaint is with the bar guard which is a separate piece and is somewhat hard to put back in place each time you take the saw out."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Northern Industrial Chain Saw Case,
March 16, 2009
By ChainsawPete
from Eastern NC
"This generic chainsaw case provides an excellent value-for-money solution to the need for protective carrying case for a medium-to-small chainsaw. I am currently using it for a 24-inch saw, and that is about as large as it will accomodate.
This case is not fancy, but it has been entirely servicable to carry and protect my saws.
The case offers space (with blade cover) for one saw, plus space for a quart of bar oil, a container of 2-cycle-mix oil, a scrench, extra chain, rag, etc.
Because the case is "squared off," it is easier to store and stack with other equipment than one of the "saw-shaped" cases that usually come with the saws.
I will not hesitate to get another one of these cases if I need it."
This case is not fancy, but it has been entirely servicable to carry and protect my saws.
The case offers space (with blade cover) for one saw, plus space for a quart of bar oil, a container of 2-cycle-mix oil, a scrench, extra chain, rag, etc.
Because the case is "squared off," it is easier to store and stack with other equipment than one of the "saw-shaped" cases that usually come with the saws.
I will not hesitate to get another one of these cases if I need it."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
Log Cutter,
March 16, 2009
By remclassic
from Livingston, TX
"Liked the case, it fit as I hoped it would. Time will tell if it holds up the the use and the oils and fuels that will get on it froom time to time."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Works for Stihl MS390 w/ small mod,
March 5, 2009
By Lammur
from Burnsville, MN
"Compact but ample storage. Discreet cube box with mat black finish does not advertise contents. Construction is better than a Stihl case, especially the hinges. All plastic product but well made for the money.
The case required 15 minutes of modification to the interior compartment to fit my MS390 Stihl saw properly. The saw fit without modification but required forcing the front door aprox 1/4". I used a heat gun to push back a small portion of the interior back wall to fit the wrap around handle and a vary small spot on the interior floor to fit the base of the saw. The saw now fits perfectly. The mod is not visible and does not alter the integrity of the case. Not sure but the same could probably be done with a lighter or maybe even a hair dryer. Easy mod, no experience necessary!
Good generic case!"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
3
/
5
xxxx,
October 31, 2008
By powersaw
from virginia
"Decent quality. This is not a direct replacment for a Husqvarna power box. The Dolmar PS 6900,7300,7900 and Makita 6401 will not fit this box without modification. The power box is supposed to fit these saws but I have not verified this personaly"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Fits My Husky Great!!,
August 18, 2008
By emstemen
from Michigan
"Purchased this for my 18" Husky and have been very pleased. Now I can keep all of my chain saw stuff together. No more looking for a file or extra chain in the tool box. It's also great for hauling all my gear out into the woods. I would definately recommend this product to anyone looking for an easy storage solution for their chain saw."
What is your level of technical expertise? Home Handyman
Share this Review:
What's Included with this Item?
- (1) Chain saw case
Tools to help you find what you need and get back to your project.
Product Tools
Shopping Tools
Site Tools
Related Products
You may be interested in these Chain Saw Accessories
See All
4 / 5
4.2 / 5
5 / 5
2 / 5
Item# 118877
Item# 190700
Item# 119100
Item# 11800
Only $34.99
Only $29.99
Only $999.99
Only $9.99
People that bought this item were also interested in these items
Item# 118877
Item# 119031
Item# 119986
Item# 119040
Was $39.99
Only $34.99
Only $54.99
Only $29.99
Sale $29.99
