Prince PTO Tractor Pump 11.4 GPM, Model# HC-PTO-2A
Gear-type, heavy-duty pump is designed for PTO drive operation on tractors of all sizes. No additional gearing is required. These pumps feature self-adjusting wear plates that seal off leakage and offset any wear or expansion that may occur during the life of the pump. High tensile aluminum housing, minimum gear clearance, cast iron endplates. Internal splined shafts go all the way through and are supported on both sides by roller bearings. All models have a #16 SAE inlet port and two #12 SAE outlet ports. Include #12 SAE to 3/4in. NPTF female adapter. Reservoir size should at least be as large as the output of the pump.
hydralic pump,
March 16, 2009
By sheepherderfrom Northern Wyoming
"Was a replacement for a 3 point backhoe attachment. Works better than the original pump. Made a new machine out of it. It was actually cheaper buying this pump than replacement parts for the old one. Performance is excellent! Would highly recommend these gear drive pumps. Thanks Northern!"
What is your level of technical expertise?:
Professional
Overall Rating:
5
/ 5
Dependable Solid Pump,
March 16, 2009
By HardToPleasefrom Atlanta, GA
"I bought the pump to use on a back-hoe I purchased a year ago. The pump that came with the back-hoe did not have the capacity to do what I needed. This pump has the capacity to do more than what I need. It was very easy to hook up and it is bullet proof. Very solidly built, I have a John Deere 40 plus horse power tractor that matches up nicely with this pump. The cost was cheaper than any place else I looked. I would highly reccomend this pump to anyone. No need to buy the extended warranty; I am sure this pump will outlast my back-hoe."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
HYDRAULIC PUMP,
April 15, 2008
By leon55from ALABAMA
"THIS PUMP WAS AN EXCELLENT PUMP FOR THE BACKHOE THAT I HAD BOUGHT FOR MY TRACTOR. IT WAS EASY TO INSTALL AND WAS BUILT VERY SOLID. I AM VERY PLEASED WITH THIS PUMP AND I WOULD BUY ANOTHER ONE IF I NEEDED TOO."
What is your level of technical expertise?:
Home Handyman
Overall Rating:
5
/ 5
pto hydraulic pump,
March 7, 2007
By dlplostfrom Corning, NY
"We bought this pump to run our wood splitter. Wood splitter is about 20 years old with a 4" dia cylinder, and has always been run off of an internal pump on one tractor. But sometimes we need the tractor for other things at the same time. So we got this pto pump so that we can run the splitter off of any tractor with a pto instead of just that one with the internal pump.
Absolutely excelent pump. It Took less than an hour to change the wood splitter to run off of this pump, and now we can run it on any tractor that isn't buisy doing something else. We started using it on the back of a Ford 8N which runs it fine, and now We've actually been running it on the back of an old JD MC bull dozer. Gives a very fast cycle time even with a 4"x24" cylinder. Removal or instalaton on the back of any tractor only takes one person and about 30 seconds
Excelent product and is out producing a 7hp splitter with one of those high/low pumps."
What is your level of technical expertise?:
Home Handyman
4.9 / 5
5 / 5
