Horizontal-Mount Vent Kit For Mr. Heater 45,000 BTU and 75,000 BTU Garage Heaters — 4in. Flue Pipe
Mr. Heater garage heaters Item#s 173636 and 173637 require direct venting to deal with by-products of combustion. Venting kit meets all standards related to the national fuel gas code. For horizontal mount only.
Product Specs
Additional Specs
- Kit includes:
- One 4in. Elbow (26-GA)
- One 3in. to 4in. Connector
- One 4in. Gas Vent Top
- Two 4in. x 2ft. Pipe (26-GA)
- One Adjustable Wall Thimble
- One 36in. x 4in. B-Vent
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
4.4
/
5
9 of 10(90%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
4
/
5
Everything it needed to be,
May 2, 2008
By ShovelheadBob
from Northeastern Ohio
"All the parts needed to vent the heater in my application."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
3
/
5
horizontal mount vent kit,
January 15, 2008
By Remodeler
from Whitney Point, NY
"Nothing in the literature told me what was included in the kit. I did not use anywhere near all the parts, so I feel that I paid for more than I needed to. The instructions were sketchy, at best, not telling where insulated pipe should be used and where non-insulated pipe should be used.
The collar for going through the wall was coming apart and had to be repaired.
The heater instructions indicated that a 3" pipe could be used for a short run, but the only thing offered in a kit was a 4"."
The collar for going through the wall was coming apart and had to be repaired.
The heater instructions indicated that a 3" pipe could be used for a short run, but the only thing offered in a kit was a 4"."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
EXCELLENT ADDITION,
January 15, 2008
By repete
from Saratoga, NY
"I used this kit to install my hanging heater, It had the exact fittings I needed for install. Would have cost more seperately"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Good product with good price.,
January 14, 2008
By mcgyver
from nj
"Bought this item with my Garage heater , 45k btu.
Very easy to install, the hardest part is making the hole in the wall. Assembly is easy and instructions were good for this item."
Very easy to install, the hardest part is making the hole in the wall. Assembly is easy and instructions were good for this item."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
5
/
5
Horizontal vent kit,
October 8, 2007
By Lanster
from Catawissa Pa.
"Quality materials, nice fit."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
4
/
5
Horizontal Vent kit,
March 9, 2007
By Badgeboyz
from Boonville, IN
"Great Product. Made the installation of my Mr. Heater a lot easier with a complete kit. Recommend this product."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
4
/
5
Good vent kit,
March 7, 2007
By SD101
from Maine
"Everything you need to install a Mr.Heater.
A better cap would make this kit Excellent"
A better cap would make this kit Excellent"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
,
March 7, 2007
By Scoots
from NJ
"This thing is great! Leave the thermostat on about 50 & go to work in warmth. What more could you ask for?"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Perfect kit for a quality heater!,
January 29, 2007
By Ranger
from Albuquerque, NM
"This kit worked like a charm. This was my first horizontal vent kit install, and it whent very painlessly. all of the required parts were there. I highly recommend this for anyone needing a horizontal vent!"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
4
/
5
Vent kit,
November 18, 2006
By BMBLDRS
from Vernon, VT
"All I needed was there. Even had a double walled pipe for going through the wall."
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Manufacturer Warranty: 12 months parts / 12 months labor
Tools to help you find what you need and get back to your project.
Product Tools
Shopping Tools
Site Tools
Related Products
You may be interested in these Venting
See All
4.4 / 5
4.3 / 5
4.5 / 5
4.7 / 5
Item# 173642
Item# 36625
Item# 161609
Item# 177441
Was $219.99
Only $119.99
Sale $169.99
Only $4.99
Only $49.99
People that bought this item were also interested in these items
Item# 173637
Item# 172644
Item# 173640
Item# 173644
Was $449.99
Sale $399.99
Only $499.99
Only $119.99
Only $119.99
