Character Metal Stamps — 3/16in. size, 36-Pc. Set
Brass punch and stamp holder. Letters A-Z, ampersand (&), plus numerals 0-8 (use 6 for 9). Storage case.
Product Specs
Key Specs
Pieces (qty.) | 36 |
Letters | A to Z, and "&" |
Numbers | 0 - 8 (use 6 for 9) |
Storage Case Included | Yes |
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
3.5
/
5
8 of 12(67%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
5
/
5
Good Letters,
October 19, 2009
By Sparky51
from Connecticut
"It's easy to stamp even, legible letters and numbers, of even depth, into key tags, tools, etc."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Character Metal Stamps,
October 19, 2009
By Balsam
from Luxemburg, Wisconsin
"I did purchase these and found them to be exactly what I was looking for.
Inexpensive and worked great.
I needed a way of making my own metal tags for my dog collars. I cut a three-quarter inch wide by one-eighth thick piece of aluminum long enough for my needs. I stamped the information I needed on them and riveted them to my dog collars."
Inexpensive and worked great.
I needed a way of making my own metal tags for my dog collars. I cut a three-quarter inch wide by one-eighth thick piece of aluminum long enough for my needs. I stamped the information I needed on them and riveted them to my dog collars."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
1
/
5
Not for stamping,
March 9, 2009
By Ethan7
"Brass part has two springs inside and it's actually nice. They sell this as just a punch, I would go with that.
Here's the bad:
The small magnet inside was received all crushed. If not seated inside correctly, it will get crushed as you hammer your first stamp anyway.
Some letters didn't even fit inside the hex, had to grind it so it will fit!
If you stamp more than 1 letter in a row, the bit will be jammed in there and it will be tough to get out. Mine is stuck with the one that makes a period, i.e. it's now just a center punch.
You can't line up the letters. the hex part and the letters are all over the place.
If you plan on stamping something other than 1 letter, it will be crooked.
If you plan on stamping something other than 1 letter, it will be crooked.
Even with 1/8 inch aluminum, you had to really drive it home to get anything."
Share this Review:
Overall Rating:
3
/
5
STEEL PUNCH,
August 18, 2008
By AWR1
from Texas
"The punch set works well with aluminum but does not have enough punch to stamp into steel. The case is a little weak but will keep the set together."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
METAL STAMPS,
January 14, 2008
By RR1909
from OWENSBORO, KY
"THE STAMP SET IS CONVENIENTLY PACKAGED AND WELL MADE.
THE STAMPS CUT WELL INTO KEYS , PLASTIC, LOCKS, ETC. AND THEY SEME TO STAY SHARP(SO FAR)
HIGHLY RECOMMENDED FOR THE OCCASIONAL STAMPING SOMEONE AT HOME MIGHT NEED"
THE STAMPS CUT WELL INTO KEYS , PLASTIC, LOCKS, ETC. AND THEY SEME TO STAY SHARP(SO FAR)
HIGHLY RECOMMENDED FOR THE OCCASIONAL STAMPING SOMEONE AT HOME MIGHT NEED"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Tool is nice, however, I didn't use it for metal.,
October 15, 2007
By medoart
from Alabama
"Let me start with the fact that I did not use this tool on metal. It was used to put imprints (letters and numbers) in wood and clay. However, the tool is very well made, the pieces are well set up in the strong case and the the bits lock nicely into the tool. I doubt you could use this tool for mass production, but I see no reason it would not work well for stamping metal or any other surface.
The quality of the tool, its parts and the case is very impressive."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
,
July 17, 2007
By Elvis1966
from Memphis, TN
"perfect for soft metals and small projects"
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
2
/
5
metal stamp set,
July 9, 2007
By joe63
from flagstaff Az.
"sorry but this item doesn't work verry well had to punch metal several times inorder to get a mark and then it wasn't clear"
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
2
/
5
The Stamp Tool Used To Hold The Stamp!!!!!!!!,
July 9, 2007
By mustangsally
from Denton,Texas
"The tool used to hold the numeric or alpha stamp is not steady enough for you to hold it and hammer the character in one spot, it moves constantly. But the 36 character stamps comes in handy when you trying to number pistons in and engine during breakdown."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
punches,
July 9, 2007
By priority1towing
from tennessee
"great set of punches use them all the time, rebuilding motors."
What is your level of technical expertise? Professional
Share this Review:
Tools to help you find what you need and get back to your project.
Product Tools
Site Tools
Related Products
You may be interested in these Chisel, Punch + Stamp Kits
See All
4.1 / 5
4.8 / 5
4.4 / 5
4.5 / 5
Item# 158350
Item# 15367
Item# 15803
Item# 15365
Only $24.99
Only $19.99
Only $19.99
Only $10.99
People that bought this item were also interested in these items
Item# 15367
Item# 14572
Item# 15803
Item# 5226030
Only $19.99
Only $21.99
Only $19.99
Only $14.99
