Northern Industrial Cast Iron Anvil — 50-Lb.
Cast iron anvils have many uses. Ideal for metal-working, loosening fittings and more!
Product Specs
Key Specs
Weight (lbs.) | 50 |
Overall Length (in.) | 13 1/4 |
Overall Height (in.) | 7 |
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
4
/
5
8 of 9(89%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
4
/
5
Great price, decent quality,
October 19, 2009
By koumis
from Elbert Co, CO
"I bought the 50 lb. because I needed something to pound on occasionally -- flattening, bending, rivets, etc. I'm not a full-time blacksmith so I didn't want to plunk down a lot of cash for something that gets occasional use, nor did I want to destroy my vise. This product fits the bill."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
2
/
5
Great price poor quality,
March 29, 2009
By Thermalfun
from Chicago, IL
"This Anvil is very cheap in comparison to most other anvils. To buy even a small anvil would cost nearly twice as much. However with this great price comes a trade off of poor quality. This anvil is not tool steel and will deform to most hammer impacts. In addition the anvil's face is riddled with little craters which require the user to mill down."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
4
/
5
Can't beat for the $$$,
August 23, 2008
By DSP435
from virginia beach, va
"Its heavy, stable and metal. How bad can it be? If you do occasional metal work its better than beating on something like your vice. I did spray paint mine around the parts that I don't hammer on to keep it from rusting, the paint could be a little better quality, it chips very easily."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
55 Lb Anvil,
August 12, 2008
By Barto
from Jefferson County, AL
"This anvil does exactly what I bought it to do. It is just right for shaping, forming or flatening a piece of metal."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
55&70lb anvils,
January 5, 2008
By empty
from KING GEO., VA.
"I got the 55lb anvil, because I knew it would only be a matter of time before I busted another vise(beating on and around it). I got the 70lb for a friend(ferrier) of mine and he said it's perfect, he loves it. You can beat the anvil, but not the price!!!"
What is your level of technical expertise? Professional
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
3
/
5
55# Anvil,
October 15, 2007
By Pegleg
from Michigan
"Not a bad anvil for the cost. It has a nice working surface. I would have prefered a Ferriers anvil but couldn't fine one..."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
4
/
5
Cast Iron Anvil — 55-Lb,
October 8, 2007
By Dork
from Campobello, SC
"It's hard to get excited about an anvil but I can say the price was right and I find I have more uses for it than I thought I would. I did have to put some rust resistant paint on it since I have it outside."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
5
/
5
Medium-sized Anvil,
March 7, 2007
By FarmBorn
from Mid-Ohio
"I was very pleased with the delivery and value of my anvil. I have needed one for years, and procrastinated purchasing. I would recommend this to anyone that works in metal."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
4
/
5
Cast Iron Anvil,
March 7, 2007
By Buck05
from Chelmsford, MA
"The 55 lb. cast iron anvil was what I was looking for and more. I have been using my bench vise as a pounding surface and have almost destroyed it.
The anvil provides a large surface for pounding and shaping metal things.
It is a good size for home or industrial use."
The anvil provides a large surface for pounding and shaping metal things.
It is a good size for home or industrial use."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Tools to help you find what you need and get back to your project.
Product Tools
Shopping Tools
Site Tools
Related Products
You may be interested in these Anvils
See All
4.5 / 5
4 / 5
3.2 / 5
Item# 153110
Item# 153111
Item# 153170
Only $18.99
Only $59.99
Only $69.99
People that bought this item were also interested in these items
Item# 153170
Item# 1649902
Item# 1586710
Item# 158672
Was $44.99
Was $199.99
Only $69.99
Only $49.99
Sale $37.99
Sale $179.99
