Deluxe Steering Wheel Spinner, Model# KH9181
Backing up, turning and parallel parking have never been easier! Spinner fits most steering wheels. Wood finish knob is textured for a sure grip. Rubber insert protects steering wheel.
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
4.6
/
5
10 of 11(91%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
5
/
5
Deluxe Steering Wheel Spinner Clearly Superior,
November 26, 2006
By LT180
from Chattanooga, TN
"Northern Tool offers two spinner knobs, the deluxe Model# KH9181 and what I found to be a standard type of knob which is widely available. The Northern Tool deluxe model is clearly superior for several reasons. First of all, it mounts using a sturdy cast alumnium clamshell type clamp with one strong bolt, instead of a couple pieces stamped out of sheet metal with loose nuts and bolts, so assembly is literally a snap. Also, unlike lesser models, the smooth clamp places the knob outside rather than on top of the wheel. This design not only avoids clamp parts that could end up being a hazzard, it also gives significantly increased leverage since the knob is located farther from the center of the wheel. It's almost like power-steering! A thick rubber insert helps the clamp grip the wheel securely without scratching or otherwise damaging its surface. The knob and stem are large and high enough to keep your fingers above the steering wheel, and the textured top completes the factors which make for a good grip and and flawless operation. It is well worth the small premium over the common standard design, and the very fair price for this superior product. While I bought the steering wheel spinner knob because I had injured a hand and temporarily needed to steer with one hand, I have no doubt that I will keep using it because it really does improve the steering and handling of my lawn tractor immensely, even if it's not green."
What is your level of technical expertise? Home Handyman
1 of 1 people found this review helpful.
Share this Review:
Overall Rating:
5
/
5
Deluxe Steering Wheel Spinner, Model# KH9181,
November 2, 2009
By 1Locksmith
from Catonsville MD.
"Install the nut on the inside of the steering wheel. I have had wheel spinners in the past where it was clamped on each side of the steering wheel. It would catch my paints of even i would whack my knuckles on my other hand.
This Wheel Spinner I like. I use it in my Ford E-250. Not ever did the Police ( when i got pulled over for speeding ) say anything about the Wheel Spinner on my steering wheel.Cost is not a factor. When you are happy with something $2 or $3 dollars more or less does not matter."
This Wheel Spinner I like. I use it in my Ford E-250. Not ever did the Police ( when i got pulled over for speeding ) say anything about the Wheel Spinner on my steering wheel.Cost is not a factor. When you are happy with something $2 or $3 dollars more or less does not matter."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
Steering wheel spinner Model,
July 13, 2009
By EersToYa
from Clermont,FL
"I have over 1 1/2 acres to mow. I purchased the Steering wheel spinner for my 42" Craftsman lawn tractor. It is great ,especially if one has to make a lot of turns. It is very easy to Install and NOW all my neighbors want one.."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
steering wheel spinner,
August 13, 2008
By Boone1946
from Shelby,Ohio
"I just bought a new 4 wheel steer lawn tractor without power steering. When you turn it sharply, you are turning mechanical steering linkage on both ends of the tractor. I needed a wheel spinner to assist. It makes the job much easier. I would highly recommend this heavy duty model as other models can break at the stress bolt that holds it together. I had this happen years ago. Also, this new one is very smooth to the touch with no bracket parts sticking out too far where you might get snagged or cut."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
steering wheel spinner,
August 11, 2008
By Bynum
from Michigan
"this is a great product. it was a bolt on application. this product was just as described . i have used your company over the past several years and have never had a bad experance. your products are good ,your price is reasonable and your shipping is fast."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
It great!,
October 15, 2007
By Judy16
from Minnesota
"My lawnmower is hard to turn. This Steering Wheel Spinner makes it so much easier. I have arthritis in my hands, so this Spinner has really
helped me a lot. I would recommend this to anyone."
helped me a lot. I would recommend this to anyone."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
3
/
5
Steering Wheel Spinner,
October 8, 2007
By 503Maverick
from Nicholasville, KY
"The quality of this product is very good, but you have to have a thick steering wheel. I though for sure it would fit at least one of my tractors. The clamp is simply just to big for most older riding mowers and farm tractors."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
wheel spinner,
July 12, 2007
By jockey72
from Picayune, Mississippi
"I placed this product on my Farm Pro Tractor. My hands give me trouble sometime, and this product helped me greatly. It made me think I had power steering. Although it is just a small item, it made a very big difference.
Thank you"
Thank you"
What is your level of technical expertise? Beginner
Share this Review:
Overall Rating:
4
/
5
Great Steering Wheel Spinner,
July 9, 2007
By MickeyMan
from North Western Illinois
"I put this on one of the new Cub Cadet i1050 zero-turn garden tractors. I was very happy with the tractor before, but with this addition: I'm In Love! Fits the larger diameter steering wheel grip. I had to add some locktite a few weeks after first installing it, as the nut wouldn't stay tight. I also had to use a c-clamp to install it with the rubber spacer material that was included, as it needed nore squeeze than I could provide with one hand while installing the nut. Works great!"
What is your level of technical expertise? Professional
Share this Review:
Tools to help you find what you need and get back to your project.
Product Tools
Shopping Tools
Site Tools
Related Products
You may be interested in these Mower Accessories
See All
4 / 5
4.5 / 5
4.7 / 5
3 / 5
Item# 174885
Item# 16931
Item# 2500269
Item# 80162
Was $199.99
Sale $169.99
Only $12.99
Only $24.99
Only $17.99
People that bought this item were also interested in these items
Item# 6310
Item# 158501
Item# 1753
Item# 2505892
Was $49.99
Was $29.99
Sale $44.99
Sale $24.99
Only $199.99
Only $21.00
