| Overall Rating: |
|
5
/ 5
|
Not just neat, but a requirement !!!,
March 17, 2009
By mccwho
from Columbus, Ohio
|
"I originally thought that it would be a nice addition to my 4000 psi power washer. But after I received this gauge and used it. I found that it should be a requirement to get this. I no longer have to guess what pressure I am running at, I don't have to try and remember how many turns to the left or right it is set it at. I just look at the gauge and dial in the pressure to match the tip or the job. Since I got this I no longer have any fears about putting to much pressure through my expensive turbo nozzle or wonder if I am going to take the paint off because of too much pressure.
I just turn on the motor, let it stabilize, then turn the adjustment up or down to match the job. I also found that if the pressure is not enough for a certain type of job I just bump up the pressure until I get the results I want. I then record the pressure setting for this type of job, then the next time I do this same type of job, I just set it the same pressure, "wha la", perfect pressure setting ...A BIG TIME SAVER."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Guage is a Must,
August 18, 2008
By Bill4351
from Northwest Ohio
|
"I bought this guage to install on my 4000 PSI power washer that did not have one. It is exactly is as advertised and I would highly recommend."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Heavy duty and easy to read,
August 12, 2008
By ranger302j
from Lafayette, LA
|
"This gauge is very nice, it is liquid filled so it absorbs vibration well. Large easy to read face and quick connect fittings make it very easy to disconnect when not in use. Would recommend to anyone to monitor the performance of their pump and nozzles."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Simple, Useful, Easy,
August 11, 2008
By AliasSudheer
from Michigan
|
"This is a very simple tool, easy to use for troubleshooting problems with your pump. When i bought a new pump, the first time i used it did not deliver the specified discharge pressure. Called tech support, answered a few questions and they said all pumps are tested and set before shipping. Instead of returning the pump they offered this accessory. As soon as it arrived i tried again and found out that the regulator needed a little adjustment, set to nominal discharge pressure and problem solved in just seconds, saving the hassle of returning pump and waiting for it to come back. I keep it in my test equipment box for future use. Very valuable little test tool that can save your day."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Pressure Gauge,
August 11, 2008
By TonyZ22
from MA
|
"I have used this gauge many time to test my equipment. Its large numbers are easy to view and quick connect make it so even a six year old can help."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
3
/ 5
|
Works but delicate,
June 22, 2008
By MattW
from S. Florida
|
"It works well, but is delicate. Mine worked great until I dropped it on the concrete. Nothing appeared physically broken, but the needle no longer points at zero when it's not in use, and the readings seem to be consistently off by about 1000psi post-drop. It's my fault for dropping it, obviously I broke something inside, but it would be nice if it were more heavy duty. Before the drop it worked well, gave consistent readings that seemed to be accurate judging by the ratings for my pressure washer. So it works great, just don't drop it."
|
|
What is your level of technical expertise?:
Home Handyman
|
0 of 1 people found this review helpful.
|
| Overall Rating: |
|
5
/ 5
|
Northstar pressure washer gauge-5000 PSI,
April 16, 2008
By petro47th
from Luling La.
|
"Used pressure gauge today for 1st time and was satisfied with its performance , quality and price. Thanks"
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
Pressure washer guage,
March 30, 2008
By danaurora
from Katy, Texas
|
"Product is easy to install and use. It gives me assurance of what the pressure is when cranking up or down on the unloader. Guage is not accurate on the low end. It reads 400-500 psi with just hose line pressure and the unloader backed out all the way. It does read within 100 psi of the rating of my pressure washer when the unloader turned up to max. I disconnect it when I store my washer to eliminate potential for corrosion. Good accessory for the money."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
It Can Take The Pressure,
January 14, 2008
By SrMechEngr
from Gulf Coast
|
"You don't need to make any adjustments to your pump to appreciate the usefulness of this little device. The simplicity of installation and ability to protect the gauge has made this a must have product. I needed a gauge to help set the unloader pressure, but did not want to hard mount a gauge, since the vibration will eat it alive. The parts are of good construction and the gauge is easy to read, especially while the pump is operating and can be installed in the discharge line at a point of your selection. Virtually no maintenance other than occasional lubrication to prevent corrosion. I highly recommend this product."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
pressure guage,
October 21, 2007
By topcat777
from South Carolina
|
"A very good pressure gauge.It lets you know the true pressure that is being presented from the pump."
|
|
What is your level of technical expertise?:
Professional
|
|
|
4.5 / 5
4 / 5
4.7 / 5
