| Overall Rating: |
|
5
/ 5
|
3-Point Quick Change Hitch,
October 19, 2009
By Stillarebel
from Chattanooga TN
|
"Excellent product - For years I have wrestled with implement hook ups to my tractor. This Quick Change hitch works great. Backup, position the hitch and it's all done. I hesitated to try these out because I thought it might allow the implement to suddenly decouple in the field causing me lost time or damage to either my tractor or the implement. I have had no such problem. I highly recommend this hitch."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
1
/ 5
|
maybe for the residential farmer / not for me,
August 2, 2009
By tawhite
from Dayton,Texas
|
"I purchased this product due the fact that I seldom have someone around to help with attachments.The product is a great concept except that it does not and will not hold up to the wear and tear put on it while brushhogging.The bolts that hold it on are not upgradded bolts and broke off as did the spring that holds the latch closed.I had to tie wrap the latch closed and finally the latch broke and I had to end up taking the whole assembly off. The parts on it were wearing out within only a few months of use. The product was built cheap and will not hold up to any kind of abuse."
|
|
What is your level of technical expertise?:
Home Handyman
|
1 of 1 people found this review helpful.
|
| Overall Rating: |
|
4
/ 5
|
Quick change Cat 2 hitch,
July 20, 2009
By DocA
from SE Ohio
|
"Even though my Deere 5310 is a Cat 2 ball, the lift arm width is less than 3 1/4 inches, meaning I will need to fabricate a part as all my equipment has been converted to Cat 2. The width of the lift arm should be annoted in the product description as the Cat 1 quick change is for lift arms <3 1/4", and the
Cat 2 >3 1/4""
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Quick Hitch,
July 13, 2009
By RLBLP
from Stephenville, TX
|
"Works great to hook up my auger, shredder, and discs. Before it was a misery of pushing, shoving, and kicking to get it all lined up right. Attachments go on easy and have stayed put. Much cheaper than other quick hitches I've seen."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
3-Point Quick Change Hitch — Category 2,
July 13, 2009
By Doug49
from Reno, NV
|
"3-Point Quick Change Hitch — Category 2 was easy to install!
Save a lot of time connecting implements!
Well made!"
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Back Saver,
November 20, 2008
By JtMo
from Indiana
|
"Before I got these I used to man-handle my bush hog, tiller, and other attachments when mounting them to my tractor. I don't know why I waited so long to get these. They take the pain out of changing implements. These are quality built (heavy) pieces of steel that will last a lifetime."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
quick hitch,
November 18, 2008
By jkb1
from Grafton WV
|
"Product works on everything but disk mower. The disk mower slips out of the latches. But it works great for everthing else and it sure saves a lot of effort when hitching and dehitching."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Quick Hitch,
November 17, 2008
By hotdog56
from Texas
|
"I recently purchased a set of quick hitches for my tractor 3 point hitch. The best thing I ever put on my tractor, it has cut implement hook-up time in more than half! They were easy to install and the instructions wre easy to follow. I own my own business and change implements often and use them hard. I'll have a pair for my next tractor too. Good product, good price. Thanks!"
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
Great looking product,
August 11, 2008
By GreenHornet
from winters, CA
|
"I ordered this product to easier make connecting my old million ton flail mower to the tractor by myself. However, the mower has a covering bracket that will not allow the Quick Change Hitch to reach the pins. I plan on replacing the mower within the year so I am saving the product to use later. It's a great looking product!"
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
Quick Hitch,
April 23, 2008
By rocco1
from Mifflinburg, PA
|
"These are a little tricky to set up, you have to adjust allen screws to get quick hitches lined up at the right angle as the pins on your 3 point attachment; but once you set it up once, it is done and makes changing implements a breeze! Well worth the money, the one piece quick hitches sometimes dont fit certain implements."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
|
4.5 / 5
4.4 / 5
3 / 5
