 |
FEATURED REVIEW
|
|
| Overall Rating: |
|
5
/ 5
|
20 ton jack,
April 16, 2008
By deereman24
from St. John,KS
|
"I am a John Deere Tech. I use this jack on everything almost. I run a service truck and have to raise alot of equipment on service calls very hand and time saving to the customer when your on there buck. To save time and money I would highly recommend this product to any tech."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
20 Ton Air/Hydraulic Jack,
November 17, 2008
By MartyFarms
from Nezperce, ID
|
"These jacks are the best with the use of the air they are very quick and provide plenty of power. I wouldn't own any other style of bottle jack. The parts are easily replaced and resonably priced. Being a farmer we are sometime forced to jack heavy equipment in undesirable places these jacks make a lousy job easier and faster. Every service pickup should have at least 2."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
1
/ 5
|
jack,
August 19, 2008
By bhardy
from phila.ms
|
"we do tire work and i purchaced two ,one stopped working 2 months the other 3 months they would be ok for light duty but not useing 10 to 20 times aday i replaced them with the better and more expensive brand and they are doing fine"
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
4
/ 5
|
heavyrepair,
August 12, 2008
By boatrepair
from Northern Indiana
|
"We have several of these jacks in use both in a shop and field application. Other than the external springs that do not stay on the jack long in our application it is a ggod jack for the money. We have several of higher priced jacks in use and other than they are heaverier to move these have proformed well along side these."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
a nice jack with a very nice price, May 2008,
August 11, 2008
By tmullins
from Atoka, Ok
|
"I use this jack for road service on semi truck & trailers. It works very good and no trouble out if the jack. Im looking to get 3 more jacks for my fleet."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
Hydraulic jack into tubing bender,
August 11, 2008
By RBuggy
from Hamilton, MT
|
"I purchased the 20 ton hydraulic air jack with the hopeful feeling that I could make it work in a tubing bender. Knowing that I found the jack for hundreds less at your company then other bending companies I felt I couldn’t loose. Wow, I installed the jack into the custom built bender and within minutes I was bending tube. And, with an incredible ease due to the pneumatic option. I have already had offers to buy my bender and I will build the next one with the same hydraulic jack."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
5
/ 5
|
Awesome bottle Jack,
August 11, 2008
By Keaster
from St. Joseph, Mo
|
"This jack is great for everything. We use it on a lift table we modified to fit the jack so we could use the pneumatic part of it. We also use it to lift our tractors and other vehicles to change tires. It's also not too heavy to take out in the field if you need."
|
|
What is your level of technical expertise?:
Home Handyman
|
|
| Overall Rating: |
|
4
/ 5
|
Torin/Jacks,
August 11, 2008
By MachineMover
from SD
|
"Problem: Lifting a 30,000lb machine and putting a pan under the whole machine. I hooked 3 torin air operated spring return jacks in series and they lifted the machine perfectly level and I got my pan installed safely with no problems."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
2
/ 5
|
Poor reliability,
May 27, 2008
By scruffy
from idaho
|
"This jack worked great for about 3 months, then stopped working entirely. After some repairs, it was working again, but soon began to leak. Not very good in the reliablity department."
|
|
What is your level of technical expertise?:
Professional
|
|
| Overall Rating: |
|
5
/ 5
|
bottle jack,
April 21, 2008
By scurvy
from Waynesville, N.C.
|
"I purchased this jack a couple of years ago. I use it to power a custom made metal press that I use in my artist blacksmith business . I have bent thousands of feet of solid bar from1/4" up to 1' using this jack and it has never failed."
|
|
What is your level of technical expertise?:
Professional
|
|
