Torin Folding Engine Stand — 1500-Lb. Capacity, Model# T26801
Order Today and Save $20
Heavy-duty 4-leg folding engine stand from Torin has a large, heavy chrome head and frame black frame for big block and display engines.
Product Specs
Key Specs
Capacity (lbs.) | 1,500 |
Mounting Head Bolt Holes (qty.) | 4 |
360° Rotating Head | Yes |
Lockable Mounting Head | Yes |
Foldable | Yes |
Additional Specs
- 4-hole mounting head rotates 360°° and locks with a pin
- Folding design saves space for storage in shop or garage
To see more images and rich media content please install the current version of Flash player.
Customer Product Reviews
Overall Rating:
4.4
/
5
10 of 11(91%)would recommend this product to a friend.
Share this Product:
Review This Product
Overall Rating:
5
/
5
Folding engine stand is great,
July 20, 2009
By venture2009
from North of Boston MA
"We run a marine business and space is a premium. This engine stand holds our 75Hp diesels no problem. Makes a rebuild much easier and it takes up very little space in the shop."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
diesel engines,
March 24, 2009
By pumpman
from Lafayette, LA
"I use this stand to rebuild Lister and Duetz engines And I am very pleased with it. All other stands that I have used before had to be modified. This stand rolls very easy even with 1200 lbs engine on it. It is worth every dollar."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
Great stand,
November 17, 2008
By DNYC
from NY, NY
"Built my 502 boat engine with all manifols, risers and plumbing. Holds the weight with very little flex."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
Great buy,
August 11, 2008
By Enginedoc
from Michigan
"I find this stand to be an great engine work stand . it supports large engines well and they are easy to move and rotate. it fits nicely under my work bench in my engine room . I would buy another if i need it but i all ready have 6 other stands out of my 6 stands this is the nicest other then a custom built I made which cost a lot more to build then the cost of this stand I believe you wont be dissapointed with your purchase."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Good crane.,
June 3, 2008
By dig060504
from San Antonio, TX
"Crane is really sturdy. Has some pretty ugly welds, but it is holding up so far. Assembly was quick and easy.
Word of advice- Lube up the casters/bearings before assembly. They were all really dry and grinding, but some all purpose lube did the trick.
All in all, I would buy again if I had to get rid of mine. Nice knowing it's rated to 1500 lbs."
Word of advice- Lube up the casters/bearings before assembly. They were all really dry and grinding, but some all purpose lube did the trick.
All in all, I would buy again if I had to get rid of mine. Nice knowing it's rated to 1500 lbs."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
5
/
5
great product , great price,
April 21, 2008
By scooter27
from dallas/ft.worth TX
"i rebuild ALOT of marine engines and i have been using this engine stand for awhile and i must say that i really like it.
it holds a fully dressed marine v-8 with no problems at all.
it rolls very easy with an engine on it.
the only problem , well not really a problem but the only thing i didn't like too much is the little pin they use to hold it in place.
Course i just use a big bolt which works perfect.
it is an awesome engine stand at an awesome price."
it holds a fully dressed marine v-8 with no problems at all.
it rolls very easy with an engine on it.
the only problem , well not really a problem but the only thing i didn't like too much is the little pin they use to hold it in place.
Course i just use a big bolt which works perfect.
it is an awesome engine stand at an awesome price."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
5
/
5
Torin Folding Engine Stand,
January 14, 2008
By Vini63
from Chino Hills, CA
"The engine stand turned out to be more ruggedly built than expected. The assembly was a breeze and the casters make for easy maneuverability. The folding feature really helps with freeing up floor space."
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
,
December 1, 2007
By Ohhiitsme
"ok so this stand is great, but to use it you need to put the engine crane out at max. extention to get the stand under it. and the holes for the bell housing bolts were too long, so i had to go out and buy longer bolts. and the center whell is a bit too low, so it will someetimes interfere with steering the stand around the garage. not a real big deal though. overall its a good stand, heavy duty."
What is your level of technical expertise? Home Handyman
Share this Review:
Overall Rating:
2
/
5
Engine stand,
March 7, 2007
By MIKE1
from Suffolk, LI
"Sirs,
I purchased this because the weight rating was sufficient to hold the block of a 6 cyl Isuzu diesel that I'm rebuilding. I was unable to utilize the stand for two reasons;
1- the brackets provided did not have holes big enough to fit the bell housing bolts so I'll need to fabricate custom brackets.
2- the legs are too wide to permit me to move the stand between the lower support feet of the engine hoist. I kept finding myself about 8" to 1" short of making up the stand to the engine when I used the foldable two ton hydraulic lift to hold the engine up as explained in the stands instructions.
Trying to use the stand ...especially because I can't get it close to the hoist.... is very frustrating. I though that this would be an easy stand to use to help facilitate access to the engine for rebuilding. I'm finding it easier to just use the hoist and wood blocking to accommodate the engine.
I purchased this because the weight rating was sufficient to hold the block of a 6 cyl Isuzu diesel that I'm rebuilding. I was unable to utilize the stand for two reasons;
1- the brackets provided did not have holes big enough to fit the bell housing bolts so I'll need to fabricate custom brackets.
2- the legs are too wide to permit me to move the stand between the lower support feet of the engine hoist. I kept finding myself about 8" to 1" short of making up the stand to the engine when I used the foldable two ton hydraulic lift to hold the engine up as explained in the stands instructions.
Trying to use the stand ...especially because I can't get it close to the hoist.... is very frustrating. I though that this would be an easy stand to use to help facilitate access to the engine for rebuilding. I'm finding it easier to just use the hoist and wood blocking to accommodate the engine.
-Mike"
What is your level of technical expertise? Professional
Share this Review:
Overall Rating:
4
/
5
Over all, a well built stand,
February 19, 2007
By slicksilverss
from Lower Alabama
"Very sturdy stand. Nice to be able to fold it up out of the way. However some of the welds look like they were made by a third class welder third shift. Effective welds, but very ugly looking."
What is your level of technical expertise? Home Handyman
Share this Review:
What's Included with this Item?
- (1) Engine stand
Manufacturer Warranty: 12 months parts / 12 months labor
Tools to help you find what you need and get back to your project.
Product Tools
Shopping Tools
Site Tools
Related Products
You may be interested in these Engine Stands
See All
3.6 / 5
3.5 / 5
4.4 / 5
3 / 5
Item# 158857
Item# 1446003
Item# 144444
Item# 144850
Was $44.99
Was $109.99
Was $89.99
Sale $39.99
Only $279.99
Sale $89.99
Sale $79.99
People that bought this item were also interested in these items
Item# 144850
Item# 144847
Item# 144848
Item# 1446003
Was $89.99
Sale $79.99
Only $229.99
Only $169.99
Only $279.99
